Upper Control Arms Toowoomba

Are You Sick Of Wearing The Out Side Edges Off Your Tyres! We Have The Solution


Why Blackhawk Upper Control Arms Toowoomba for Your 4×4?

4×4 with independent front suspension (IFS) must have a Blackhawk upper control arms Toowoomba installed. This helps in ensuring the correct wheel alignment and the prevention of outer edge tyre wear on lifted vehicles. It also helps in fixing the following issues associated with raised suspension:

  • Vague response and steering due to reduced caster correction
  • Lack of control and difficulty in handling due to bump steering
  • Clearance issues affecting large wheels and tyres
  • Minimal strength during off road scenarios
  • Upper control arms (UCA) hitting the coil on a full droop


Read on to see how Blackhawk Upper Control Arms Toowoomba helps in eliminating these issues.


Benefits of Black Hawk Upper Control Arms Toowoomba

For those looking to find the best UCA for their vehicles, Blackhawk Toowoomba is one of the best options as shown in these features:


Perfect Caster Correction

Blackhawk Toowoomba UCA has a 3 degrees correction, which is equivalent to 30 to 70mm, the perfect amount of correction needed for your 4×4.

Can fit even larger tyres and wheels

Blackhawk Toowoomba UCA can fit even larger than standard size tyres. Now you can have these high-quality upper control arms even for your customised tyres and wheels. Order one, today.


Suspension components and chassis clearance

Blackhawk fixes the problem with UCA hitting the coil of the chassis mount during suspension. Thus, it does not post any limit to the amount of travel of your 4×4.


Secured ABS Lines

Blackhawk also incorporates tabs and mounts to ensure the OE lines can be discreetly put into place. This reduces damages to the sensitive lines of your system.


Increased strength capacity

These UCA Toowoomba also have stiffer arms that provides increased handling and better response mechanism to the driver.


Durable discreet finish

The upper control arms Toowoomba of Blackhawk is has a machine alloy dust cap with black anodized incorporated in its logo. This deters corrosion. It’s strategic position also aids in protecting the top section of the ball joint from dust, mud and water.


Computer modelled for uniformity

All of this upper control arms Toowoomba products have been computer modelled. It has also passed and undergone both static and bump/internal load tests. All of which has been certified and reviewed by local VASS engineers.

The result is 4×4 products that are of sound design. It even exceeds the original equipment design in terms of strength and functionality.

So, what are you waiting for? Your search for the best upper control arm for 4×4 is now over. Buy your Blackhawk Toowoomba UCA, today.